Chicken broast is a familiar fast-food favourite across Pakistan, recognised by its craggy golden coating and juicy, well-seasoned meat. Commercial broasting may use dedicated pressure-frying equipment, but this home version makes a similar crispy fried chicken in an ordinary deep, heavy pan. The two important stages are a tangy marinade that flavours the meat and a flour coating with little flakes that crisp in hot oil. This is not a shortcut recipe: allow time for marinating, fry in measured batches and check that the thickest parts of the chicken are cooked properly. Serve with chips, ketchup, garlic sauce and a crunchy salad.
Quick Answer
For home-style chicken broast, marinate 1 kg bone-in chicken pieces in 500 ml buttermilk, 1 teaspoon salt, 1 teaspoon paprika, ½ teaspoon black pepper and 1 tablespoon lemon juice for at least 4 hours. Coat with 300 g plain flour, 100 g cornflour, 1 teaspoon baking powder and the remaining spices, pressing the flour on firmly. Rest the coated pieces for 10 minutes, then fry in batches at about 170°C (340°F) for 14–20 minutes depending on their size. Chicken should reach at least 74°C (165°F) at the thickest part, away from bone. Drain on a rack and serve hot.
Recipe At A Glance
- Prep time: 20 minutes, plus 4 hours marinating
- Cook time: about 25 minutes in batches
- Makes: 4 servings
- Calories: about 660 kcal per serving, depending on the pieces and oil absorbed
Ingredients
Chicken And Marinade
- 1 kg (2.2 lb) bone-in chicken pieces, about 8 pieces
- 500 ml (2 cups) plain buttermilk
- 1 tbsp lemon juice
- 1 tsp salt
- 1 tsp sweet paprika
- ½ tsp ground black pepper
Crispy Flour Coating
- 300 g (2½ cups) plain flour
- 100 g (¾ cup) cornflour or cornstarch
- 1 tsp baking powder
- 1½ tsp salt
- 1 tsp garlic powder
- 1 tsp onion powder
- 1 tsp sweet paprika
- 1 tsp crushed red chilli flakes, optional
- ½ tsp freshly ground black pepper
- ½ tsp ground white pepper
For Frying
- About 1.5–2 litres neutral frying oil, depending on pan size
- A deep pan, kitchen thermometer and a wire rack for draining
Instructions
Step 1: Marinate The Chicken
Pat the chicken pieces dry and check for stray fragments of bone. Mix the buttermilk, lemon juice, salt, paprika and black pepper in a large bowl, then turn the chicken through it until every piece is covered. Cover and refrigerate for at least 4 hours, or overnight if convenient. Do not leave the chicken marinating on the kitchen counter. Before coating, lift the pieces out one at a time and let excess marinade drip back into the bowl; a little cling of marinade is useful for creating a rough crust.
Step 2: Prepare The Seasoned Coating
Combine the plain flour, cornflour, baking powder, salt, garlic powder, onion powder, paprika, chilli flakes and both peppers in a wide, shallow dish. Mix thoroughly so each spoonful contains the same seasoning. Drizzle 2 tablespoons of the marinade into the dry flour, rub it lightly between your fingers and break up the clumps. Those tiny, uneven flour pieces are what create a wonderfully craggy crust during frying. Keep a clean plate or rack ready for the coated chicken.
Step 3: Coat And Rest The Pieces
Press each chicken piece firmly into the seasoned flour, turning to cover every fold and crevice. Shake off loose excess without rubbing away the coating. For a heavier crust, dip the piece briefly back into marinade and flour it a second time. Set the coated chicken on a rack for 10 minutes while the oil heats; this short pause allows the outside flour to hydrate slightly, helping it cling rather than scatter into the pan. Keep raw chicken and its utensils away from cooked food.
Step 4: Fry At A Steady Temperature
Fill a deep, heavy pan no more than halfway with neutral oil and heat to around 170°C (340°F). Lower in only a few pieces at a time; overcrowding chills the oil and makes the crust greasy. Fry for roughly 14–20 minutes, turning carefully every few minutes so the coating colours evenly. Smaller wings may finish sooner, while large bone-in thighs can need longer. Check the thickest part with a food thermometer: it must reach at least 74°C (165°F), without touching the bone. Adjust the heat to maintain roughly 165–175°C during cooking.
Step 5: Drain, Rest And Serve
Transfer cooked pieces to a wire rack over a tray rather than stacking them on paper. Give them 5 minutes to settle while another batch cooks; trapped steam can soften the crust. If a piece darkens before it reaches the required internal temperature, reduce the oil heat and allow a little more cooking time instead of removing it too early. Sprinkle lightly with a pinch of salt if needed. Serve immediately with fries, ketchup, a chilled garlic sauce or chopped salad.
Why This Is Home-Style Broast
The word broast is commonly used for crunchy, deeply seasoned fried chicken, especially on takeaway menus. The original commercial pressure-fried method relies on specialised machinery; trying to seal a household pressure cooker containing hot oil is not a suitable substitute. This recipe deliberately uses conventional open-pan deep frying. It aims for the familiar texture and flavour while giving practical times and a thermometer check that home cooks can actually follow.
Tips For Maximum Crunch
Dry the chicken before marinating: Too much surface water weakens the seasoned buttermilk. Build small flour clumps: A tablespoon or two of marinade in the flour creates uneven, crunchy flakes. Keep the oil steady: Fry only a few pieces per batch and allow the oil to recover between batches. Serve immediately: Pair with Homemade French Fries or Mint Chutney for a familiar combination.
How To Avoid Soggy Or Dark Coating
A very pale crust often means the oil was too cool, while an exterior that browns rapidly before the centre cooks means the oil was too hot. Use a thermometer rather than guessing by the sound of bubbling. Crust falling off can result from excess marinade, a flour layer that was not pressed on firmly or too much moving in the first minutes. A rack lets steam escape; stacking hot pieces in a closed bowl makes a once-crisp crust soften quickly.
Make Ahead And Storage
Marinate the chicken a day ahead in a covered refrigerated container. Prepare the dry flour mixture separately, but coat the meat shortly before frying for the best crust. Refrigerate leftovers promptly after they have stopped steaming, ideally within two hours, and use within three days. Reheat in a hot oven or air fryer until thoroughly hot to revive some crunch; reheating in a covered microwave makes the coating softer. Do not mix leftover raw marinade into a dipping sauce.
Frequently Asked Questions
Can I Make Chicken Broast In An Air Fryer?
Yes, but the coating needs a light coating of oil and the result will be different from deep-fried broast. Cook in batches according to the appliance instructions, check the thickest chicken pieces reach 74°C, and avoid loose dry flour patches.
Why Is My Broast Coating Falling Off?
The flour may not have been pressed on well enough, or the chicken may have been moved too soon after entering the oil. Let the coated pieces rest for 10 minutes and turn carefully once the first side has begun to set.
Can I Use Boneless Chicken?
Boneless pieces cook more quickly and are easier to portion. Reduce the frying time and use a food thermometer rather than relying on the bone-in timings in this recipe.
How Much Chicken Broast Do I Need For 20 People?
For approximately 20 servings, allow about 5 kg chicken, 2.5 litres buttermilk, 1.5 kg plain flour and 500 g cornflour, with five times the listed seasonings. Fry in many small batches and keep cooked chicken hot on a rack in a low oven while the remaining pieces finish.
Have You Made This Recipe?
Tell us how it turned out and what you served alongside it.
Try Zinger Burger and Chicken Pakora next. Subscribe to Yariz Recipes for new recipes by email.
Photo Credit: Miansari66, Wikimedia Commons, Public Domain.




