A well-seasoned cast iron pan is naturally non-stick, rust-proof and will last a lifetime, or several. “Seasoning” simply means baking thin layers of oil onto the iron until they turn into a hard, slick coating. Whether your pan is new, rusty or sticky, this step-by-step guide will get it back to a smooth black finish.
Quick Answer
To season cast iron, wash and fully dry the pan, rub a very thin layer of high-smoke-point oil (vegetable, canola or flaxseed) over every surface, then wipe off as much as you can. Bake it upside down at 230°C (450°F) for 1 hour and let it cool in the oven. Repeat 3–4 times for a strong non-stick finish.
At a Glance
- Active time: 10 minutes
- Oven time: 1 hour per coat, plus cooling
- Oven temperature: 230°C / 450°F
- Coats: 3–4 for a new or stripped pan, 1 for a touch-up
What You Need
- Cast iron pan, skillet or tawa
- Dish soap and a stiff brush (steel wool if there is rust)
- 1 tbsp high-smoke-point oil: vegetable, canola, sunflower or flaxseed
- Lint-free cloth or kitchen paper
- Foil or a baking tray to catch drips
Instructions (Oven Method)
Step 1: Clean the pan
Wash the pan in hot soapy water and scrub with a stiff brush. If there is rust, scrub it off with steel wool until you reach bare grey metal. Soap is fine at this stage because you are about to re-season.
Step 2: Dry completely
Towel-dry, then put the pan on medium heat for 3–5 minutes until every trace of moisture has evaporated. Any water left behind causes rust.
Step 3: Oil very thinly
While the pan is warm, rub about 1 tsp oil over the inside, outside and handle. Then take a clean cloth and wipe it all off as if you made a mistake. The pan should look dry, not shiny. Too much oil is the number-one cause of sticky seasoning.
Step 4: Bake upside down
Heat the oven to 230°C (450°F). Place the pan upside down on the middle rack with foil on the rack below, and bake for 1 hour.
Step 5: Cool and repeat
Turn the oven off and let the pan cool inside. Repeat steps 3–5 another 2–3 times for a new or stripped pan. Each coat makes the surface darker and slicker.
Stovetop Method (No Oven)
Perfect for a cast iron tawa. Heat the dry pan on high until it just starts to smoke. Wipe on a very thin layer of oil with kitchen paper held in tongs, let it smoke for 5 minutes, then cool. Repeat 3–4 times. Ventilate well.
Daily Care
- Clean while warm with hot water and a brush; a little soap is fine on a well-seasoned pan.
- Never soak it or put it in the dishwasher.
- Dry on the stove and wipe on a few drops of oil before storing.
- Cook fatty foods first. Frying, shami kebabs and parathas build seasoning; save tomato-heavy curries like shakshuka for once it is well established.
Troubleshooting
- Sticky or tacky surface: too much oil. Bake for another hour at 230°C to finish curing it.
- Flaking black bits: old seasoning breaking off. Scrub the loose patches and re-season.
- Orange rust spots: scrub with steel wool, dry on the stove and season once.
Frequently Asked Questions
What is the best oil to season cast iron?
Any neutral oil with a high smoke point: vegetable, canola, sunflower or Crisco. Flaxseed gives a very hard finish but can flake if applied thickly. Avoid butter and olive oil for seasoning.
How often should I season cast iron?
Do a full oven seasoning when the pan is new, rusty or dull. After that, everyday cooking and a thin coat of oil after washing keep it seasoned; most cooks re-season in the oven once or twice a year.
Can I use soap on cast iron?
Yes, a small amount of mild dish soap won’t remove proper seasoning. Just never soak the pan or leave it wet.
Is cast iron good for cooking for large groups?
Yes. A large cast iron pan or tawa holds heat steadily, so it is ideal for frying batches of kebabs or parathas for 20 people without the temperature dropping between batches.
Did this guide help?
Tell us how your pan turned out, or ask your cast iron questions in the comments.
Want more kitchen guides? Subscribe to Yariz Recipes and get every new post by email.
Photo: Engin Akyurt via Pexels.




